Utilisation of Copper Slag Waste and Heavy-Weight Aggregates for Production of Pre-cast shielding Concrete Elements

Authors

  • Wojciech Kubissa Faculty of Civil Engineering, Mechanics and Petrochemistry, Warsaw University of Technology, 17 Łukasiewicza St., 09-400 Płock, Poland
  • Roman Jaskulski
  • Pui-Lam Ng
  • Jiajian Chen

DOI:

https://doi.org/10.5755/j01.sace.22.1.20006

Keywords:

amphibolite, barite, basalt, copper slag, heavy-weight aggregate, magnetite, shielding concrete

Abstract

Concrete as a versatile building material can provide physical and biological shielding against ionizing radiation. In addition to nuclear reactor covers, facilities requiring radiation protection are radiological and X-ray laboratories in hospitals or health centres. The function of radiation protection can be met by heavy-weight concrete, whose shielding properties are largely derived from the high-density aggregates. One of the possible construction methods of shielding walls in healthcare buildings is the use of pre-cast concrete blocks. For this purpose, research on a concrete having a density in the air-dry state of higher than 3200 kg/m3 using barite, magnetite and basalt as coarse aggregate and copper slag waste (from by-product of the process of copper extraction by smelting) as fine aggregate has been performed. The copper slag waste has been used, among others, as an abradant in the surface sand-blasting process but after such usage it is considered to be a waste and as indicated by pilot research, it can be a good substitute for sand in concrete. Mechanical properties, water absorption and sorptivity of heavy-weight concrete so produced were compared with reference concrete prepared with crushed amphibolite as coarse aggregate and quartz sand as fine aggregate.

The suitability of copper slag waste for making small pre-cast shielding concrete elements is confirmed. The compressive strength of heavy-weight concrete mixtures with copper slag waste was sufficient for the intended applications. The copper slag concrete had lower water absorption and sorptivity than concrete prepared with sand. An economic analysis of the costs of producing concrete with a density higher than 3200 kg/m3 with or without copper slag waste showed that the copper slag concrete, regardless of the type of heavy-weight aggregate used, is clearly more economical than the concrete of the compositions reported in the literature containing similar coarse aggregates and sand as the fine aggregate.

DOI: http://dx.doi.org/10.5755/j01.sace.22.1.20006

Downloads

Published

2018-09-27

Issue

Section

Articles